RC REA C187 - Advanced Operation and Calibration; Trimming Notes; Receiver Socket Introduction; Gyro Calibration Method

9
Warning
Maintain a flying altitude above one meter
Introduction of the corresponding socket of receiver
Gyro calibration method
1. When flying yaw, first land and calibrate the gyroscope.
2. When calibrating the gyroscope, the aircraft must be
placed on a level ground.
3. The indicator light will flash quickly during the calibration process,
the indicator light stops flashing to take off.
Trimming Notes
main motor
tailor motor
tail LED
front LED
left
right
forward/
backward
reserved
channel
reserved
channel