10
Commonly used parts replacement instructions
C187
Remove the propeller with a hex
wrench,
Be careful not to be too tight when
installing
the new propeller
First pull out the screw, and then pull out
the big gear directly downward.
Pay attention to the direction when instal-
ling the new gear. The plane of the shaft
should be aligned with the plane of the
inner hole of the gear.
Unplug the plug, then twist the motor
left and right to pull out
When removing and replacing the tail
rotor, please pay attention to the direc-
tion, align the motor shaft and press it
slowly to ensure smooth rotation.
To Next Page
Loading...