38
Memory
To delete an Intercom/Memo Log:
1. Press the DIRECTORY button.
2. Press the corresponding button (1-16) for the Intercom/Memo Log you want to delete.
3. Press the DELETE button and delete. DELETE again shows in the display.
4. Press the DELETE button again to confirm.
NOTE: Press the EXIT button to cancel the "delete" function.
Clear All Memories
1. Press the MENU button while in standby mode.
2. Use the REVIEW < or > button to scroll to SET SET PHONE OPTIONS.
3. Press the SELECT button.
4. Use REVIEW < or > button to scroll to CLEAR ALL MEMORIES.
5. Press the SELECT button.
6. Use the REVIEW < or > button to scroll to Yes or No, No is the default.
7. Press the SELECT button to confirm.
NOTE: If you select YES, all the directory memories and direct access memories are cleared.
Chain Dialing
This process allows you to dial a succession of stored numbers from separate memory locations. This is useful when you must dial several
sequences of numbers, such as with frequent calls via a telephone company long distance provider.
To Next Page
Loading...