26
STEP: 4
Slide the straight ends of the
straps from back to front into the
clip portion of the ball assembly.
▲
▲
▲
▼
▼
Step: 8
Slide holster
onto the mount.
Step: 7
Feed the excess strap length into the return slots.
Step: 6
Pull both straps
simultaneously, to tighten
the assembly onto your dash.
Step: 5
Attach the hooked
side of both straps to
the air vent.
CA 1000 gw new 11/2/99, 1:29 PM26
To Next Page
Loading...
