Do you have a question about the RCA RP-6150 and is the answer not in the manual?
FM Tuning Range | 88 - 108 MHz |
---|---|
MW Tuning Range | 530 - 1600 kHz |
Input sensitivity | 2.5mV (MM), 150mV (line) |
Dimensions | 440 x 147 x 300mm |
Weight | 6.4kg |
Tuning range | FM, MW |
Signal to noise ratio | 70dB (MM), 80dB (line) |
Speaker load impedance | 8Ω to 16Ω |
Frequency Response | 20Hz to 20kHz |
Signal-to-Noise Ratio | 70dB (MM), 80dB (line) |
Explains powering the unit via batteries or adapters, with important notes and warnings.
Guides on antenna attachment, optional antennas, and private listening with safety notes.
Details belt clip, light, and battery saver functions for mobile use and power saving.
Provides an alphabetical list and general information about each button and control on the scanner.
Explains the various messages and indicators that appear on the scanner's display screen.
Step-by-step guide on how to adjust the volume and squelch knobs for optimal listening.
Introduces methods for programming frequencies into the scanner's memory, including manual entry.
Covers storing frequencies into channels and using limit/direct search modes.
Details scanning stored channels and organizing them into channel storage banks.
Covers manual channel selection, delay, keylock, channel lockout, priority scan, and receive modes.
Provides steps for resetting and initializing the scanner to resolve issues.