25
Displays in Viewfinder
• TAPE END flashes when you have
approximately five minutes
recording time left on the cassette.
• TAPE END briefly appears when
you reach the end of the cassette
during recording.
• These displays are not recorded
when they appear.
Time and Date Display
• Press DATE/TIME repeatedly to
display time and date, AUTO date,
TITLE and date, date only, or no
date display when the camcorder
is in record pause.
• These displays are recorded when
they appear.
• Details are on pages 26-27.
DISPLAY
CAMERA/OFF/VCR
DATE/TIME
Power
Zoom
Buttons
INDEX
When DISPLAY is pressed, the
display appears in the viewfinder.
INDEX appears briefly when the
camcorder automatically indexes the
tape. It is not recorded on the tape.
Details are on page 21.
TAPE, NO TAPE, and TAPE END
• TAPE flashes when you try to
record and the safety tab has been
removed.
• TAPE flashes when a damaged
tape is inserted. Remove the tape
and replace it with a new one.
• NO TAPE flashes when you try to
record and there is no cassette in
the camcorder.
To Next Page
Loading...
Need help?
General
