4
First-Time Operation
2. Attach the adapter/charger.
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
• Attach one end of the
adapter/charger’s DC cable to the
DC OUTPUT jack on the
Adapter/Charger
DC OUTPUT
Jack
Adapter/Charger’s
DC Cable
DC IN 9.6V Jack on
Back of Camcorder
adapter/charger.
• Attach the other end of the cable to
the DC IN 9.6V jack on the
camcorder.
• Plug the adapter/charger’s plug into
an operating outlet.
• Details are on page 10.
To Next Page
Loading...
