RCA DRC69702

6
Connections
Watching a DVD on your TV
1. Connect your TV to the DVD player using a standard AV Cable (not included).
2. Turn on the TV and follow the instructions included with it to play the DVD.
Note:
• Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak
signal.
• IfyourTVdoesnothaveAudio/Videoinputs,youwillneedtopurchaseanRFmodulator(soldseparately)
and follow the instructions included with it to connect the unit to your TV.
B. Connecting a TV (for the DVD Player Only)
If your TV has Audio/Video inputs, you can connect the DVD player to your TV using a standard A/V cable
(not included).
A. Watching a DVD on the DVD Player and the Monitor
You can watch the same DVD on the DVD player and the monitor.
Watching a DVD on the DVD Player and the Monitor
1. Connect the DVD player and the monitor using the included DC-AV Cable.
2. Turn on the DVD player and the monitor.
3. Play a DVD on the DVD player; the monitor will play the same DVD at the same time.
Monitor -
left side right side
AV-DC cable
(included)
To A/V OUT &
DC IN 9V-12V
jacks
To A/V IN &
DC OUT 9V-12V
jacks
DVD player
right side
AV cable
(not included)
To A/V OUT jacks
TV
DVD player
right side
RCA DRC69702 IB.indd 6 11/25/2008 2:28:56 PM