15
EN
Recording
VCR recording
1. Insert a recordable tape into the tape deck.
2. If necessary, change the tape speed by pressing SP/SLP on
the remote control. The selected tape speed shows briefly
on the TV screen.
• SP = Standard play, SLP = Super long play (around x2 to
x3 the recording time as the tape indicates)
3. Refer to the instructions on page 14 to watch TV and
change channel, or select viewing a device connected to
your unit (e.g. camcorder).
4. Press VHS REC on the unit or RECORD (blue key) on the
remote control to start recording.
5. Press PAUSE to pause recording. Press VHS REC or
RECORD to resume.
6. Press STOP/EJECT to stop recording.
Make sure the safety
tab of the tape is in
place. Recording is not
possible if the safety tab is
removed. If the safety tab
is removed and you want to
record, simply cover the hole with adhesive tape.
Safety tab
Press either key to
start VCR recording
To Next Page
Loading...
