The following items are included:
RCA Digital TV Converter Box
Quick Start
Guide
User Manual
(this booklet)
RF coaxial cable
Program
Codes
Remote control
(with 2 "AAA" batteries)
Step 1: Installation
The Converter Box can be installed either horizontally or vertically. The left side of the
Converter Box can be rotated as a stand for vertical installation.
Horizontal installation
Vertical installation
Step 2: Connections
Option 1: Your TV has an antenna jack only
4
AC120V
60Hz
f:\
Connect your existing antenna cable to the
\2.J ANTENNA IN jack of the Converter Box.
t::\ Connect the RF coaxial cable (supplied) from
o
the OUTPUT TO TV jack of the Converter
Box to the ANTENNA jack of the TV set.
f3\
Slide the CH3/CH4 selector on the back of the
\V
Converter Box to the channel that is not in
use in your area. The Converter Box will send
its video signal to Channel 3 or 4 on your TV.
f;i\ Connect the AC power cable of the
~ Converter Box to a suitable wall outlet.
DTA800-B
To Next Page
Loading...
Need help?
General