RCA F20640BC

Using Advanced Features
Setting Your TV for Antenna or Cable
16
Your TV automatically adjusts this feature when the TV places channels
in memory (Autoprogram). Follow the steps below to change the setting
as needed.
1. Select the Setup menu
2. Highlight Cable/Air
3. Select Cable or Air
13
Controls Alarm Adjust Setup
Autoprogram
Label: 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
Autoprogram
Label: 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
Autoprogram
Label: 13 Clear
Channel Memory: 13 Stored
Cable/Air: Air
Press MENU repeatedly to select
the Setup menu. This menu is
white.
Press CHANNEL down to
highlight Cable/Air.
Press VOLUME + or –to select
Cable or Air. Select Cable if you
have cable. Select Air if you have
a home antenna connected to
your TV.