9
POWER button
(right side) turns
the camera on
and o (press and
hold).
Nighttime sensor
adjusts the camera
sensitivity to the
amount of ambient
light.
Microphone picks
up sound around
the camera.
DC In jack plugs
into your power
cable to power the
camera.
Adjustable antenna
communicates wirelessly
with your WiFi network.
Indicator light
shows the power
and connection
status of the
camera:
- o (camera not
plugged in or
powered on)
- solid red (on but
not connected
- blinking red (in
the process of
connecting)
- solid green
(connected to
network and App)
- blinking green
(camera being
actively viewed).
Thermal sensor detects
the temperature around the
camera.
Tour of the System: Camera
Front Back
MICRO SD slot (left side) accepts a micro SD
card (not included) for storage of automatic
photos/video.
Set Up / WiFi Reset (bottom) starts the WiFi
setup process (press and hold).
To Next Page
Loading...
