Attaching Your TV to the Table Stand
Your TV comes without the table stand attached so that you can choose to mount your TV either to its table
stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, don't attach the
table stand, and instead, follow the Mounting Your TV to the Wall instructions.
Step 1
Place the plastic bag off the TV and place it on a
table or other flat surface. Place the TV set face
down on the TV bag.
Step 2
Take the Table Stand and the three M5 ST-screws.
Attach the Table Stand to the TV with the three M5
ST-screws from the bottom, with a screwdriver.
TV cabinet with Table Stand attached. Note: If you want to mount your TV to the wall, do
not attach the stand, just attach the stand cap to
the TVcabinet.
Mounting Your TV to the Wall
Models L32HD41/L32HD31 R Purchase a VESA 200 xl00, Size M4 screw
The VESA number is the horizontal and vertical measurement of the mounting holes. For example,
200x100 refers to fact that the mounting measurements are 200mm horizontally and 100mm vertically.
Follow the directions included with the wall mount to mount the TV to the wall.
Caution; 'Yourwall
mount must be able to
bear a minimum of five
times the TV's net
weight to avoid causing
damage.
Connections and Setup :: i 7
To Next Page
Loading...
Need help?
General