RCA RC345

Enable Bluetooth on your
device (if it isn’t already
enabled).
1. Unpack
2. Install battery back-up
4. Set the time
5. Pair + connect Bluetooth
Use the TIME/VOLUME
– and + buttons to set
the minutes. To go
faster, press and hold.
Press the TIME SET
button again to finish
setting the minutes.
3. Plug in
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Settings
8:45PM
Headset
RCA RC345
Computer
8:45PM
Bluetooth devices
8:45PM
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your
device is turned on.
• The Bluetooth wireless connection works up
to a range of roughly 33 feet (10 meters).
This range may vary, however, based on
other factors, such as room layout, wall
material, obstacles, your device’s Bluetooth
performance, etc. If you’re having problems
connecting to the speaker, move closer to it.
• If your device asks you for a password to
connect, use “0000”.
When you first plug in the audio system, the
hours digits on the clock start flashing—it’s
time to set the time! Note: If the hours digit
aren’t flashing, press and hold the TIME SET
button until they do.
Use the TIME/VOLUME
– / + buttons to set the
hour.
For PM, go past 12 (the
PM indicator illuminates
on the clock).
To go faster, press and
hold.
Press the BLUETOOTH
button. After a few
seconds, the audio
system says “Pairing”
and the Bluetooth
indicator on the clock
starts blinking.
Choose “RCA RC345” from the
list of devices available.
After a few seconds, the audio
system says “Connected” and
the Bluetooth indicator on the
clock becomes solid blue.
Make sure the following items came in your
package:
• RCA Bluetooth Wireless Audio System
• AC power adapter
Battery back-up keeps time for you in case
you lose power. To install battery backup,
open the battery compartment on the
bottom of the wireless audio system and
install 2 AAA batteries (not included). Then
close the battery compartment again.
Plug the AC power adapter into the DC
5V jack on the back of the wireless audio
system.
Plug the other end into a wall outlet or
surge protector.
Press the TIME SET
button again to finish
setting the hour. The
minutes digits starts
flashing.
Start playing audio on your
device. The audio system starts
streaming this audio wirelessly.
See the Listening to Bluetooth
section for more information.

RCA RC345 Specifications

General

Brand	RCA
Model	RC345
Category	Stereo System
Tuner Bands	AM/FM
Disc Capacity	1
Radio	Yes
Remote Control	Yes
Speaker Configuration	2.0
Inputs	Aux-in

Summary

Initial Setup and Power

Unpacking and Battery Backup

Check package contents and install 2 AAA batteries for backup power.

Connecting Power Adapter

Plug the AC adapter into the system's DC 5V jack and a wall outlet.

Setting the Clock Time

Use TIME/VOLUME buttons to set hour and minutes, confirm with TIME SET.

Bluetooth Pairing and Connection

Initiate Pairing Mode

Press BLUETOOTH button; system indicates 'Pairing' with blinking indicator.

Device Selection and Connection

Enable Bluetooth on your device, select 'RCA RC345', and confirm connection.

Connection Tips and Password

Ensure Bluetooth is enabled, be within range, and use '0000' if a password is required.

Operating the Audio System

Setting and Managing Alarms

Set alarms using ALARM SET and VOLUME buttons; choose alarm source (beep, FM, Bluetooth).

Listening to FM Radio

Tune stations using FM button and TRACK buttons; note the antenna.

Playing Bluetooth Audio

Reconnect, adjust volume, control playback, and switch devices via BLUETOOTH button.

Using Sleep Timer and USB Charger

Set the sleep timer and use the USB port to charge external devices.

Smart Snooze Functionality

Any button press snoozes the alarm; press OFF to disable the function.