RCA RCD150 User Manual

EN
Radio
Select Radio Mode
When the unit is turned off, press STANDBY/ON /
RADIO / TAPE / CD once to select radio mode.
Select Radio Band
Press BAND to select between FM and AM band.
Tuning to a station
• Press TRACK/TUNE to tune down radio
frequency.
• Press TRACK/TUNE to tune up radio
frequency.
6
Tips:Tips:
Tips:Tips:
Tips:
Extend or reposition the antenna for better
FM reception. Rotate the unit for better
AM reception.
Tips:Tips:
Tips:Tips:
Tips:
Press and hold
TRACK/TUNETRACK/TUNE
TRACK/TUNETRACK/TUNE
TRACK/TUNE or to
automatically tune to the next station.
Setting Preset Stations Manually
1. In radio mode, press BAND to select radio
band.
2. Press TRACK/TUNE or to select the
station to save as a preset station.
3. Press SET.
4. Press P repeatedly to assign the preset
station number.
5. Press SET to confirm.
6. Repeat steps 2 to 5 to set additional preset
stations.
Auto Preset
Press and hold BAND to set presets automatically.
Once a station is found the search stops briefly to
allow you to listen to the station.
• Press TRACK/TUNE or at this time if
you decide not to store the selected station.
• If you decide to store the station in preset
memory, wait a few seconds and the search
will resume.
Using Presets
1. Press BAND to select between bands.
2. Press P to enter preset mode and PRESET 1
shows on the display.
3. Press P repeatedly to access the desired
preset stations.
Tips:Tips:
Tips:Tips:
Tips:
There are 10 preset locations for FM band
and 10 preset location for AM band on this
unit.
RCD150 EN 1/16/04, 2:31 PM9

RCA RCD150 Specifications

General

Brand	RCA
Model	RCD150
Category	CD Player
Language	English