Need help?Do you have a question about the RCA RCU1300 and is the answer not in the manual?
General| Brand | RCA |
|---|---|
| Model | RCU1300 |
| Type | Universal Remote Control |
| Number of Devices Controlled | 3 |
| Battery Type | AAA |
| Batteries | 2 |
| Power Source | Battery |
| Compatibility | TV, DVD, VCR |
| Brand Compatibility | Multiple brands |
Indicator light flashes to show remote operation status.
Controls the power state of the selected device.
Used to program the remote or search through device codes.
Buttons for selecting TV, VCR, and Cable Box devices.
Buttons for VCR playback functions: Rewind, Play, Fast Forward, Record, Stop, Pause.
Activates the TV VCR function on compatible devices.
Confirms channel selection or completes code entry.
Adjusts volume level and navigates through channels.
Temporarily silences the audio output.
Returns to the last viewed channel.
Used for entering device codes or channel numbers.
Accesses the TV set-up menu for adjustments.
Sets a timer to automatically turn off the TV.
List of manufacturer codes for programming television devices.
List of manufacturer codes for programming VCR devices.
List of manufacturer codes for programming cable box devices.
Start code retrieval by pressing and holding the CODE SEARCH button.
Select the device type (TV, VCR, CABLE) for code retrieval.
Press CODE SEARCH again to turn off the indicator light.
Press number buttons (0-9) until the indicator light blinks.
The blinking light indicates the first digit of the code.
Repeat the digit search process to find all three code digits.
Turn on the device you wish to program.
Press and hold CODE SEARCH until the indicator light activates.
Press the device button (TV, VCR, or CABLE) to begin search.
Press POWER repeatedly until the device turns off.
Press ENTER to save the code once the device turns off.
Steps to access the TV's settings menu using the remote.
How remote buttons operate within the TV Menu interface.
Procedure to leave the TV Menu Mode and return to normal operation.
Additional usage tips and brand-specific considerations for TV menus.
How to set the sleep timer for automatic TV turn-off.
Instructions to cancel or disable the programmed sleep timer.
Troubleshooting steps for when the indicator light does not blink.
Solutions for when the remote does not operate the connected device.
Addressing issues where commands are not performed properly.
Troubleshooting tips for programming combined TV/VCR units.
Resolving problems encountered when the VCR fails to record.
Fixing problems with channel up/down functions on RCA TVs.
General troubleshooting for issues with changing channels.
Steps to take when the remote shows no response to button presses.
Troubleshooting guide for when the sleep timer feature is not working.
Information about the RC926 Wireless Phone Jack accessory.
Details on the ANT200 Amplified TV Antenna accessory.
Instructions for placing accessory orders via telephone.
Instructions for placing accessory orders via postal mail.
To Next Page
