USING THE SCANNER
In most instances, the preset mode is correct. But
some military, ham or government organizations do
not use the preset mode. If you are able to receive
a transmitted communication when the scanner is
not set to the correct preset mode, it may sound
distorted and weak.
To reprogram the preset mode, press the AM/FM
button. AM or FM will flash in the display to
indicate that the mode has been changed.
NOTE: If you change a frequency band’s receive
mode during a search, the scanner will not use
the preset receive modes. It will now search in
the bands in the selected mode.
To Next Page
Loading...
Need help?
General
