15
Before installing, make sure there are rubber gaskets
inside the fittings at both ends of the water supply
hoses.
If there are no water inlet hoses packed with the washer
or if the hoses are damaged, Call Service
Center. Installing the water supply hoses without
rubber gaskets can cause water leakage.
When you initially install the washer, be sure to use
new hoses. Failing to do so may result in a water
leakage or overflow and may damage your property.
If a hose is too short, replace the hose with a longer,
high pressure hose.
RCA
To Next Page
Loading...
Need help?
General
