RCA RS2042 User Manual

6
EN
Settings
Showing Demonstration
Press DEMO to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold CLOCK until the hour flashes
on the display.
2. Press PRESET - or PRESET + to set
the hour and then press CLOCK to shift to
minute digits.
3. Press PRESET - or PRESET + to set
the minute.
4. Press PROG/SET to save settings and STOP
to quit setting.
Setting the Timer
1. Press and hold TIMER until the ON and clock
hour flashes on the display ( ON - timer on
time ).
2. For setting time, press PRESET - or
PRESET + on the main unit or PRESET
or on the remote control to set the hour
and then press TIMER to shift to minute digits.
3. Press PRESET - or PRESET + on the
main unit or PRESET or on the remote
control to set the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press PRESET -
or PRESET + on the main unit or
PRESET or on the remote
control to select between CD / TUNER .
6. Press TIMER to set volume. Adjust VOLUME
control to select desired volume level.
7. Press PROG/SET to save settings.
Press STOP to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon is displayed when timer is
activated.
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
RS2042 EN 2/24/04 9:43 AM Page 11

RCA RS2042 Specifications

General

Brand	RCA
Model	RS2042
Category	Stereo System
Language	English