10
HDMI
®
ARC – Connect an HDMI
®
cable (not provided) from the HDMI (ARC) connector to the
HDMI
®
input on your receiver or sound bar. This connection uses the Audio Return Channel
(ARC) feature of the HDMI
®
specification to output sound from the TV to a compatible device.
To use this feature, you must configure the TV to enable HDMI
®
ARC.
AC power
Plug your TV into a power outlet. You can tell that the TV has power because the status light on
the front of the TV lights up.
Remote control batteries
Open the back of your Roku TV remote control and insert the included batteries as indicated in
the label in the battery compartment. Reattach the back cover.
IMPORTANT NOTICE:
Depending on the country where the TV is installed, certain Roku channels may not be available.
The quick launch buttons on the remote control associated with those channels will therefore not
work. All other functionalities of the remote will work as designed.
To Next Page
Loading...
Need help?
General