9
Connecting a component with an HDMI® cable
If possible, connect your devices using HDMI
®
cables (not provided). They help to provide the
best video quality and also carry audio signals, so that only one cable is needed. For better
picture quality, we recommend that you use cables designated as High Speed HDMI
®
cables.
Tip: You might need to configure the component to send its signal through its HDMI
®
connector.
The connector labeled HDMI (ARC) has the additional ability to use the audio return channel to
send digital audio to a receiver or sound bar.
Connecting headphones or analog sound bar
You can connect headphones or an analog sound bar (not provided) to the TV’s headphone jack.
Tip: Inserting a plug in the headphone jack disables the sound from the TV’s built-in speakers.
Warning: Loud noise can damage your hearing. When using headphones, use the lowest volume
setting on your headphones that still lets you hear the sound.
Connecting an AV receiver or digital sound bar
You can enjoy Dolby Digital multichannel sound from your TV if you connect a digital amplifier or
sound bar (not provided) in either of two ways:
OPTICAL (Digital audio out) –Connect an optical cable (not provided) from an external
digital audio system.
To Next Page
Loading...
Need help?
General