What to do if the RCA RTS7131B remote control doesn’t work?
If the remote control for your RCA Speakers isn't working, first replace the battery, making sure the new battery is installed correctly. Also, make sure that nothing is blocking the remote sensor on the front of the Soundbase.
What to do if my RCA RTS7131B Speakers have no sound?
If you're not getting any sound from your RCA Speakers, here are a few things to check: First, make sure the device you're using with the speakers is actually playing sound. Then, check your TV settings to be sure it's set to send audio to external speakers. Also, verify that all the cables are plugged in correctly and securely. Make sure you've chosen the right input source on the speakers. It may also be that the unit is muted, if the 4 LED indicators are flashing, press the MUTE button on the remote control to disable the mute function. You can also try turning the unit on by pressing the button on the Soundbase or the remote. You can also try selecting different input sources such as AUX IN, OPTICAL IN, LINE IN or Bluetooth using the remote. Finally, adjust the volume, bass, or treble ...
Chemical burn hazard from ingested coin cell batteries and advice to keep batteries away from children.
Device compliance with Part 15 of FCC rules and limits for Class B digital devices.
Steps for replacing the remote control battery and associated safety warnings.
Steps for securely mounting the soundbar on a wall using provided or purchased brackets.
Steps to pair your external device with the soundbar via Bluetooth, including password entry.
Turning the unit on/off, selecting audio sources, and understanding indicator lights.
Solutions for when the unit won't switch on or there is no sound output.
General| Brand | RCA |
|---|---|
| Model | RTS7131B |
| Frequency Response | 40Hz - 20kHz |
| Input Sensitivity | 500mV |
| Power Source | AC 120V, 60Hz |
| Signal-to-Noise Ratio | >70dB |
To Next Page
