20
Tour of the Receiver
You can program the remote to
operate many other brands of
audio and video components. See
Chapter 4, Programming the
Remote for details.
SWAP AUDIO Swaps the audio only from the large picture to
the small picture when you are watching TV and using
picture-in-picture (PIP).
Surround Sound Level Controls
+ Increases the volume in rear and center speakers.
- Decreases the volume in rear and center speaker.
BY-PASS Turns on ByPass mode, which cancels all Surround
sound modes. Sound is generated without effects.
REAR•CTR LEVEL Adjusts the balance level of the rear and
center speakers. Press once for Center. Press again for Rear.
Receiver/Tuner Controls
CHAN UP and DOWN Tunes the receiver to the next or
previous preset station stored in the receiver’s memory.
FF Lets you manually move up the AM/FM band.
INPUT•SEEK Selects auto tuning or manual tuning mode.
MENU/PROGRAM Stores the selected station in the
receiver’s memory.
Number Buttons Let you enter numbers when needed.
REW Lets you manually move down the AM/FM band.
TV Controls
+ On some RCA TV models, used to adjust menu controls.
- On some RCA TV models, used to adjust menu controls.
ANTENNA Changes the antenna input.
DELAY/CH CTRL In some RCA TV models, lets you control the
channel that appears in the PIP window.
CHAN UP and DOWN Tunes the TV channel up and down.
CLEAR Removes any menu from the screen.
DISPLAY Displays channel information.
GUIDE•RDM For some models, brings up 12 small pictures
(previews of the next 12 channels in the channel list). Press
again to turn off channel guide.
INPUT•SEEK For some TV models, toggles through the
available input sources.
To Next Page
Loading...
Need help?
General
