Camera Recording
In addition to the camera itself, you will need a Camera
AC Power Supply (such as RCA Model CPS03 for use
with RCA cameras). Plug the camera cable into the
power supply and then connect the cables from the
power supply to the VCR as the drawing shows. The
connections from the VCR to your TV are the same ones
you normally use.
To start recording press RECORD on the VCR. Use the
PA USE button on the VCR to start and stop recording.
If you want to pause for more than three or four
minutes, stop the VCR by pressing STOP. When you
are ready to resume, press RECORD.
AUDIO
PLUG
VIDEO PLUG
Q TURN ON TV.
Q TUNE TV TO VCR CHANNEL (3 OR 4).
INSERT CASSETTE. ) SET SPEED
SET TO LINE.
} REWIND IF NECESSARY.
PRESS RECORD
STOP WHEN FINISHED
22
To Next Page
Loading...
