TV Monitor/Receiver Connections
- Direct Video and Audio Connections
Connecting the video output and audio output jacks of
your VCR to the corresponding video and audio input
jacks of your TV monitor/receiver may produce a
slightly better picture during playback. This "direct"
signal connection bypasses the TV tuner during
playback.
FROM HOME VHF ANTENNA
OR CABLE-TV
SYSTEM
TYPICAL
MONITOR/
RECEIVER
INPUTS
AUDIO/VIDfiO
CABLES
(NOT SUPPLIED)
SUCH AS RGA
#AHO02*
/ SIGNAL
J SPLITTER
__ (NOT SUPPLIED)
/ SUCH AS RCA
=AH020*
TO VHF
ANTENNA
CONNECTIONS
ON TV
UHF
FROM HOME
ANTENNA SYSTEM
(USED ONLYIFYOU
HAVE HOME UHF ANTENNA)
TO UHF ANTENNA
CONNECTIONS ON TV
:(USED ONLYIF YOU
HAVE HOME UHF ANTENNA
*Optional accessory available from your RCA dealer.
Operating Instructions:
• For normal VHF or cable-TV viewing independent of
VCR, place TV Monitor/Receiver in TUNER
mode and select channels with TV Monitor/
Receiver tuner.
• For viewing of channel being recorded, place TV
Monitor/Receiver in VIDEO INPUT mode. Use
VCR tuner to select channel.
• For recording one channel while viewing another,
place TV Monitor/Receiver in TUNER mode. Use
VCR tuner to select channel to be recorded. Use
TV Monitor/Receiver tuner to select channel to be
viewed.
• For playback of recorded program, place TV
Monitor/Receiver in VIDEO INPUT mode.
To Next Page
Loading...
