19
Setting Up the VCR
Front Panel Brightness (VCR Display)
You can change the brightness level of the fluorescent display
panel on the front of the VCR. Press 4 to switch between the
options.
• AUTO brightens the display when the VCR is on and dims the
display when the VCR is off.
• BRIGHT keeps the display bright.
• DIM keeps the display at a low brightness level.
Preferred Tape Speed
You can set the preferred tape speed. Press 5 to switch between
the options.
• SP sets the preferred recording speed to SP.
• SLP sets the preferred recording speed to SLP.
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in
this speed.
SLP (Super Long Play)
Gives three times the recording time
of tapes recorded in SP. Special effects
such as pause, slow motion, picture
search, and frame advance work well
when you play back tapes recorded in
this speed.
Recording Time:
Cassette SP SLP
T-120 2Hr 6Hr
T-160 2Hr 8Hr
To Next Page
Loading...
