Need help?Do you have a question about the RCF 4PRO 7001A and is the answer not in the manual?
General| Type | Active Speaker |
|---|---|
| Frequency Response | 45 Hz - 20 kHz |
| Horizontal Coverage Angle | 90° |
| Vertical Coverage Angle | 60° |
| Input Connector | XLR, Jack |
| Output Connector | XLR |
| Controls | Volume, EQ |
| Cabinet Material | Plywood |
| Driver Size | 15" |
| Sensitivity | 98 dB |
| Total Power | 700W |
| Amplifier Class | Class D |
| Protections | Overload |
| Drivers | 15" Woofer, 1.4" Compression Driver |
Covers essential safety measures for installation, operation, and maintenance of the equipment.
Ensures proper airflow, avoids heat sources, and prevents overloading for optimal performance.
Instructions on not forcing controls and using appropriate cleaning methods to maintain the unit.
Details on high-performance drivers, neodymium compression drivers, titanium diaphragms, and mid-bass woofers.
Explains the RCF 'True Active Extended Dynamics' (TAED) amplifier technology and its features.
Describes cabinet construction materials like Baltic birch and vinyl/epoxy finishes, plus flying hardware.
Details combo Jack/XLR inputs/outputs, time delay insert, and SpeakON output.
Explains line level, phase control, equalization, and system status LEDs for operation.
Covers power switch, AC sockets, and the protection fuse for safe operation.
Defines the AES standard pinout for XLR signal connectors (Pin 1, 2, 3).
Guidance on verifying voltage and cable condition before connecting the speaker unit.
Instructions on setting volume, mixer activation, and safe power-on sequence.
Details the 4PRO-7001 BA/MH units and guidelines for safe, secure suspension using fly tracks.
Covers equalization correction for arrays and the XLR time delay insert for alignment.
Describes the phase control switch for optimizing phase between cabinets when external delay is unavailable.
Explains Limiter, Thermal, Short Circuit, and Speaker Protection LEDs and functions.
Details AC voltage protection mechanisms and the corresponding LED status indicators.
Information regarding voltage selection and fuse values, intended for service centers.
Details frequency response, max SPL, sensitivity, coverage angle, driver, woofer, and power handling.
Specifies input signal, connectors, processor settings like crossover, limiter, and EQ.
Provides nominal power, frequency band power handling, and cooling method for the amplifier.
Lists physical dimensions, weight, cabinet material, hardware, handles, and pole mount details.
To Next Page
