Need help?Do you have a question about the RCF nx series and is the answer not in the manual?
Notes on preventing noise on signal cables and avoiding interference.
Advices on ventilation, avoiding overload, cleaning, and control handling.
Overview of the NX Series as a versatile tool for rental companies and musicians.
Details the connectors and controls on the input section of the NX L23-A.
Lists the acoustic components and amplifier sections of the NX L23-A.
Describes main XLR input, link output, and volume control.
Explains power, status, signal, and limiter indicators.
Details LF Shape, HF Boost switches, AC POWERCON, and main power switch.
Specifies the AES standard pinout for XLR connectors.
Important steps and warnings before powering on the speaker.
Information on voltage setup and fuse values for different regions.
Precautions for safe use of stands and poles with the NX L23-A.
Recommends settings for LF SHAPE and HF BOOST for a single speaker.
Instructions for mounting a pair of NX L23-A speakers on a stand.
Recommends settings for LF SHAPE and HF BOOST for two speakers.
Critical safety advice for suspending loads and rigging systems.
Introduction to the RCF Shape Designer software and safety factors.
Details about S 235 JR steel, yield strength, and safety factor calculations.
Specifies the maximum number of NX L23-A speakers that can be suspended.
Lists and describes the features of the NX L23-A fly bar.
Step-by-step instructions for connecting the fly bar to a chain hoist.
How to design array systems using face-to-face angle adjustments for curvature.
Information on installing the RCF Shape Designer software.
Specifies the PC requirements for running the RCF Shape Designer software.
How to input venue dimensions using FLOOR, PLANE 1, and PLANE 2.
Illustrates how audience areas are modeled in the software.
Specifying horizontal coverage distances for the array.
Details on Auto H Setting and Manual H Setting for suspended arrays.
Setting the number of cabinets and subwoofers for the array.
Graphical representations of the array and venue, and aiming splay angles.
Details on array height, trim height, pick points, and weight.
Mechanical specifications for the cluster.
Analysis of safety factors for various mechanical components.
Stacking NX L23-A loudspeakers on subwoofers using optional adapters.
How the AC STACKING / NX L23-A adapters provide tilt adjustment.
Acoustic properties of the NX L23-A, including frequency response, SPL, and coverage.
Details of input connectors and sensitivity.
Crossover frequencies, protections, and controls.
Amplifier power, cooling, and connection types.
Physical dimensions, weight, cabinet material, and mounting options.
To Next Page
General
