english
14
Filling the blank tabs it’s possible to start the program.
ENTERING VENUE DATA
For best results, planes should be used as follows:
FLOOR is used to simulate the main floor area from the stage to a rear bleacher or boundary.
PLANE 1 is used to simulate any audience continuation behind FLOOR (e.g. a rear bleacher) from the end of the main floor to furthest and
highest seat below PLANE 2.
PLANE 2 is used to simulate the furthest/highest audience area.
For all planes Length refers to the horizontal length of that plane.
For all planes Height refers to the height of the rear of the plane.
For PLANES 1 and 2 Elevation refers to the elevation (height) of the front of the plane.
For PLANE 1 and 2 Distance relates to the actual distance from the front of the array to the start of the plane.
For all planes selecting Seated or Standing places ear level at 1.3 or 1.7 m above the respective plane.
Enter the height, length and elevation of up to three planes.
Example: audience modelling
To Next Page
Loading...
Need help?
General
