Need help?Do you have a question about the RCF NX 10-SMA and is the answer not in the manual?
General| Horizontal coverage angle | 90° |
|---|---|
| Vertical coverage angle | 60° |
| Woofer Voice Coil | 2.5" |
| Input signal | Balanced/Unbalanced |
| Input connector | XLR, Jack |
| Output connector | XLR |
| Limiter | Yes |
| Standard compliance | CE, RoHS |
| Type | Active Monitor |
| Woofer | 10" |
| Tweeter | 1" |
| Frequency Response | 50 Hz - 20 kHz |
| Weight | 12.5 kg |
| Compression Driver Voice Coil | 1" |
| Input sensitivity | +4 dBu |
| Protections | Thermal, RMS |
| Controls | Volume, EQ |
| High frequencies | 1" |
| Low frequencies | 10" |
| Cooling | Convection |
| Cabinet Material | Plywood |
| Hardware | Handles, Mounting points |
| EQ Presets | Yes |
To Next Page
