Need help?Do you have a question about the RCF NX 985-A and is the answer not in the manual?
General| Frequency Response | 45 Hz - 20 kHz |
|---|---|
| Weight | 27.2 kg / 59.96 lbs |
| Horizontal coverage angle | 90° |
| Vertical coverage angle | 60° |
| Enclosure Material | Plywood |
| Pole Mount/Cap | Yes |
| Tweeter | 1.4" compression driver |
| Protections | Thermal, RMS |
| Controls | Volume, EQ |
| Connectors | XLR |
| Woofer | 15" |
Covers warnings for fire/shock risk, product handling, and general care for safe operation.
Details precautions for mains voltage, earthing, power cable, and avoiding internal access to prevent electrocution.
Covers correct connections, avoiding liquids, professional installation, supports, and hearing protection advice.
Provides guidelines on product placement, ventilation, control usage, cleaning, and signal cable management.
Details how to properly dispose of the product according to WEEE directive for environmental protection.
Provides advice on ensuring a long-life service, including outdoor setup, cold environment use, and cleaning.
Masterfully engineered three-way active speaker for bands, DJs, and rental companies, delivering stellar audio performance.
Highlights 1.75" compression driver, 8" midrange, 15" woofer, 2100W amplifier, and 100°x60° coverage.
Allows selection of 3 presets (Linear, 2 Speakers, High-Pass) indicated by LEDs.
Details Female XLR/Jack Combo Input and Male XLR Signal Output for daisy chaining.
Explains SIGNAL LED for presence and OVERLOAD LED for input signal status and potential issues.
Covers master volume adjustment and PowerCON TRUE1 TOP IP-Rated power connections.
Explains wiring for Male/Female XLR and TRS connectors according to AES standards.
Guide to verify voltage label and contact RCF service if incorrect voltage is found.
Instructions for connecting cables, setting volume, and turning on the system safely.
Information on the speaker's protection circuits that manage audio signal and distortion.
Details floor or stage standing, single, and coupled configurations on subwoofers.
Explains hanging the speaker using M10 threaded eyebolts on suspension points.
Caution against suspending the speaker by its handles; handles are for transportation only.
Ensures system safety by verifying allowed configurations and ensuring subwoofer stability.
Check power connection and switch status.
Verify signal source and cable integrity.
Turn down mixer output level to avoid distortion and overload.
Adjust source gain or mixer output level, or check signal quality.
Check AC grounding and connected equipment, including cables.
Details frequency response, SPL, coverage, transducers, input/output, processor, and power sections.
Covers CE marking, cabinet material, hardware, dimensions, and weight.
To Next Page
