Need help?Do you have a question about the RCF HD 12-A MK5 and is the answer not in the manual?
General| Power | 1400 W Peak, 700 W RMS |
|---|---|
| Frequency Response | 45 Hz - 20 kHz |
| Max SPL | 130 dB |
| Horizontal coverage angle | 90° |
| Vertical coverage angle | 60° |
| High Frequencies | 300 W Peak, 150 W RMS |
| Crossover Frequency | 1600 Hz |
| Output Section | XLR |
| Input Sensitivity | -2 dBu / +4 dBu |
| Limiter | Soft Limiter |
| Controls | Volume, EQ |
| Pole Mount/Cap | Yes |
| Type | Active 2-way speaker |
| Woofer Size | 12-inch |
| Tweeter Size | 1.0 inch |
| Woofer | 12", 2.5" voice coil |
| HF Driver | 1", 1.75" voice coil |
| Input Section | XLR, Jack |
| Cabinet Material | Composite PP |
Identifies and explains all connectors, LEDs, switches, and controls on the rear panel.
Explains different failure types (Warning, Limitation, Failure) and their LED signals.
Crucial safety warnings for suspending speakers and using mounting accessories.
Step-by-step guidance to identify and resolve speaker malfunctions.
To Next Page
