Need help?Do you have a question about the RCF HD 10-A MK5 and is the answer not in the manual?
General| Horizontal coverage angle | 90° |
|---|---|
| Vertical coverage angle | 60° |
| Input connectors | XLR, Jack |
| Output connectors | XLR |
| Cooling | Convection |
| Pole Mount/Cap | Yes |
| Color | Black |
| Type | Active 2-way speaker system |
| Woofer | 10" |
| Crossover frequencies | 1800 Hz |
| Protections | Thermal |
| Controls | Volume, EQ |
| Handles | Yes |
| Standard compliance | CE |
Overview of symbols, important notes, and general safety warnings for safe operation.
Guidelines for safe connection and use of the mains power supply, including voltage checks and cable protection.
Recommendations for safe operation, including heat management, avoiding overload, and proper cleaning procedures.
Critical warnings regarding electric shock prevention, water exposure, and unauthorized disassembly.
Instructions for the proper recycling and disposal of the product according to EEE and WEEE directives.
Tips for ensuring long-life service, including protection from elements, warming up in cold, and cleaning.
Information on FCC rules compliance for Class B digital devices and measures to correct radio interference.
Highlights the product's evolution, revolutionary design, sound quality, and suitability for professionals.
Details the high power transducers, their precision manufacturing, and performance for professional audio.
Explains Class-D amplifiers, DSP management (crossover, EQ, limiter), and input board features for efficient audio.
Describes the durable polypropylene cabinets, ergonomic handles, and versatile mounting options for intensive use.
Detailed explanation of rear panel inputs (XLR/Jack), outputs, LEDs (Limiter, Signal, Power), and controls (Volume, Switch).
Crucial safety advice regarding loudspeaker connections, electrical dangers, and compliance with electrical regulations.
Specifies wiring standards for Male/Female XLR and TS/TRS Jack connectors for balanced and unbalanced signals.
Instructions for verifying voltage labels and contacting service for voltage changes or fuse replacement.
Guidance on connecting cables, setting volume, and the correct sequence for turning on the speaker and mixer.
Explanation of failure types (Warning, Limitation, Failure) indicated by the Limiter LED and Ready LED status.
Diagnostic steps for common failures, including power checks, voltage verification, and overheating assessment.
Describes various floor, stage monitor, pole, and subwoofer mounting configurations for the speakers.
Information on using M10 suspension points for hanging the speakers, with an example of proper hanging.
Critical warnings against suspending speakers by handles, emphasizing they are for transport only, not rigging.
Safety precautions for using pole stands or subwoofers, ensuring stability, horizontal placement, and checking configurations.
Emphasizes that stand and pole mount accessory use requires qualified personnel and user responsibility for safety.
Troubleshooting steps for when the speaker does not turn on or has no sound despite being connected to power.
Addresses problems like distorted sound, low volume, hissing, humming, or buzzing noise from the speaker.
A warning against disassembling the product, advising to refer servicing to qualified personnel for safety.
Detailed dimensional drawings and measurements for the HD 10-A MK5 speaker model.
Detailed dimensional drawings and measurements for the HD 12-A MK5 speaker model.
Detailed technical specifications including acoustics, transducers, input/output, processor, power, and compliance.
Information on physical dimensions, weight, cabinet material, handles, grille, and shipping package details.
To Next Page
