Need help?Do you have a question about the RCF NX 910-A and is the answer not in the manual?
General| Woofer Size | 10" |
|---|---|
| Horizontal coverage angle | 100° |
| Vertical coverage angle | 60° |
| Input connectors | XLR, Jack |
| Output connectors | XLR |
| Crossover frequencies | 1600 Hz |
| Protections | Thermal, RMS |
| Limiter | Soft Limiter |
| Total Power | 2100 W Peak |
| Cooling | Convection |
| Power connector | Powercon |
| Pole Mount/Cap | Yes |
| Color | Black |
| Sensitivity | 98 dB |
| Type | 2-way active speaker |
| Frequency Response | 50Hz - 20kHz |
| Tweeter Size | 1.75" |
| Input signal | Balanced |
| Input sensitivity | -2 dBu |
| Controls | Volume, EQ |
| High frequencies | 300W |
| Cabinet Material | Plywood |
| Hardware | 2 x M10 |
| Standard compliance | CE |
Covers electrical safety, installation, handling, and system setup for safe operation.
Describes the preset selector, volume control, and power switch for operating the speaker.
Highlights critical safety warnings regarding rigging, use of handles, pole stands, subwoofers, and qualified personnel.
Provides guidance on diagnosing and resolving common problems such as no power, no sound, distortion, and noise.
Comprehensive table detailing acoustical, transducer, processor, power, compliance, and physical specifications for all models.
To Next Page
