Need help?Do you have a question about the RCF ART525A and is the answer not in the manual?
Essential safety rules for installation, operation, and maintenance to prevent hazards.
Guidance on hearing protection and avoiding potential health risks from high sound levels.
Overview of the ART Series' design goals, focusing on portability, power, and clarity.
Details on woofers, drivers, amplifiers, and cabinet materials used in the ART series.
Description of balanced XLR and jack inputs and male XLR signal output.
Explanation of the Limiter (red) and Power (green) indicator LEDs.
Details on Line Level Control, IEC socket, and Power Main Switch.
Information on XLR pinout standards and initial voltage verification.
Recommended procedure for turning on the speaker and other audio equipment.
Instructions for mounting on stands and safe suspension using approved hardware.
Explanation of the amplifier's protection circuits and indicator LEDs.
Specifications for frequency range, SPL, and coverage angles.
Information on low and high-frequency drivers, including materials.
Details on total power, low section, and high section amplifier ratings.
Overview of signal inputs/outputs, power connections, and analog input features.
Specifications for size, weight, and color of the speaker systems.
Essential safety rules for installation, operation, and maintenance to prevent hazards.
Guidance on hearing protection and avoiding potential health risks from high sound levels.
Overview of the ART Series' design goals, focusing on portability, power, and clarity.
Details on woofers, drivers, amplifiers, and cabinet materials used in the ART series.
Description of balanced XLR and jack inputs and male XLR signal output.
Explanation of the Limiter (red) and Power (green) indicator LEDs.
Details on Line Level Control, IEC socket, and Power Main Switch.
Information on XLR pinout standards and initial voltage verification.
Recommended procedure for turning on the speaker and other audio equipment.
Instructions for mounting on stands and safe suspension using approved hardware.
Explanation of the amplifier's protection circuits and indicator LEDs.
Specifications for frequency range, SPL, and coverage angles.
Information on low and high-frequency drivers, including materials.
Details on total power, low section, and high section amplifier ratings.
Overview of signal inputs/outputs, power connections, and analog input features.
Specifications for size, weight, and color of the speaker systems.
General| Type | 2-way active speaker |
|---|---|
| Frequency Response | 50 Hz - 20 kHz |
| Woofer | 15" |
| High Frequencies (Peak) | 300 W |
| High Frequencies (RMS) | 150 W |
| Horizontal Coverage Angle | 90° |
| Vertical Coverage Angle | 60° |
| Output Connector | XLR |
| Crossover Frequency | 1.8 kHz |
| Limiter | Yes |
| Cooling | Convection |
| Pole Mount/Cap | Yes |
| Colour | Black |
| Height | 700 mm |
| Input Connector | XLR |
| Input Sensitivity | +4 dBu |
| Protections | Thermal |
| Controls | Volume |
| Hardware | M10 fly points |
| Input Signal | Balanced/Unbalanced |
To Next Page
