english
11
4) Reverse and connect the 2 rear
bracket to the fly-bar using 2 quick lock
pins.
3) Connect the front bracket to the first
NX L23-A cabinet using 2 quick lock
pins.
2) Connect the second pin on the front
bracket to make sure that the
connecting bracket is vertical.
6) Reverse and connect the rear brackets
of the second cabinet using the hole
for the proper angle.
7) Connect all the other cabinets
following the same procedure and
connecting a single cabinet each time.
5) Connect the second cabinet to the
first always starting from the 2 front
brackets.
To Next Page
Loading...
Need help?
General
