RCF F 6X - Rear Panel Functions; Power Switch and Supply Inlet; Connector Types and Pinouts

10
ENGLISH
CONNECTORS
1/4” JACK CONNECTOR
Sleeve = Ground
Sleeve
Tip
Ring
Tip = Hot
Ring = Cold
BALANCED (TRS)
Sleeve = Ground
SleeveTip
UNBALANCED (TS)
Tip = Hot
Tip
Sleeve = Ground
Ring = Right Channel
Tip=Left Channel
PHONES (TRS)
Ring
Sleeve
XLR CONNECTOR
Connector pinout:
1 = earth
2 = audio signal (+ or “hot“)
3 = audio signal (– or “cold“)XLR Connector (F) XLR Connector (M)
REAR PANEL FUNCTIONS
[25] POWER SWITCH
Use this switch to turn on and off your F 6X mixer.
[26] EXTERNAL POWER SUPPLY INLET
Connect here the external power supply. The external power supply accepts power from 100 V to 240 V
AC 50-60 Hz.