RCF F Series User Manual

F SERIES MIXERS
RACK MOUNT ACCESSORIES
MOUNTING INSTRUCTION
ISTRUZIONI DI MONTAGGIO
INSTRUCTIONS D’ASSEMBLAGE
INSTRUCCIONES DE MONTAJE
MONTAGEANLEITUNG
www.rcf.it
RCF S.p.A.
Via Raffaello Sanzio, 13
42124 Reggio Emilia - Italy
Tel +39 0522 274 411
Fax +39 0522 232 428
e-mail: info@rcf.it
10307647 RevA
EN - Unscrew the five screws on each side of the F
12XR mixer and remove both side panels.
IT - Svitare le cinque viti per lato e rimuovere i fianchi
laterali del mixer F 12XR.
FR - Dévisser les cinq vis de chaque côté du mélangeur
F 12XR et retirez les deux panneaux latéraux.
ES - Desatornille los cinco tornillos en cada lado del
mezclador F 12XR y quite ambos paneles laterales.
DE - Lösen Sie die fünf Schrauben auf jeder Seite
des Mischers F 12XR und entfernen Sie beide
Seitenwände.
EN - Use three screws to fasten the rack ears on the
mixer as shown in the picture.
IT - Utilizzare tre viti per avvitare gli accessori da rack
al mixer come mostrato nella figura.
FR - Utilisez trois vis pour fixer les accessoires du rack
sur le mélangeur comme indiqué sur l’image
ES - Use tres tornillos para fijar los accesorios de la
rejilla en la mezcladora como se muestra en la imagen
DE - Verwenden Sie drei Schrauben, um das Rack-
Zubehör wie in der Abbildung gezeigt am Mixer zu
befestigen.
F 12XR
1
3
2

RCF F Series Specifications

General

Series	F Series
Type	Analog Mixer
Phantom Power	Yes
EQ Bands	3-band
Outputs	Headphones
Weight	Varies by model

Summary

Rack Mount Accessories for F Series Mixers

Remove Side Panels for F 12XR

Unscrew five screws on each side of the F 12XR mixer and remove both side panels.

Attach Rack Ears to Mixer

Use three screws to fasten the rack ears on the mixer as shown in the picture.

Rack Mounting Instructions for F 6X

Remove Side Panels for F 6X

Unscrew five screws on each side of the F 6X mixer and remove both side panels.

Attach Rack Ears to Mixer for F 6X

Use three screws to fasten the rack ears on the mixer as shown in the picture.

Rack Mounting Instructions for F 10XR

Remove Side Panels for F 10XR

Unscrew five screws on each side of the F 10XR mixer and remove both side panels.

Attach Rack Ears to Mixer for F 10XR

Use three screws to fasten the rack ears on the mixer as shown in the picture.