RCF L-PAD 12CX - Technical Specifications; Mono and Stereo Channel Specs; EQ, DSP, and Power Specifications

45
SPECIFICATIONS
Mono channels
Microphone input
Frequency response
Distortion (THD+N)
Gain range
Max. input
LOW CUT
SNR
Phantom power
Line input
Frequency response
Distortion (THD+N)
Sensitivity range
Compressor
L-PAD 12CX
XLR balanced
20 Hz to 22 kHz,+/‑1 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
0 dB to ‑50 dB
+15 dB (balanced)
75 Hz
<‑100 dBr A‑weighted
+48 V with switch control
1/4’ TRS balanced
20 Hz to 22 kHz,+/‑1 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
+15 dB~ ‑35 dB
GAIN: 0 ‑‑‑> 9 dB | THRESHOLD: 20 dB ‑‑‑> 5 dB
Stereo input channels
Mic input
LOW CUT
Line input
Frequency response
Distortion (THD+N)
Sensitivity range
SNR
Channel EQ
High
Mid
Low
2-TRACK IN
TAPE IN
Frequency response
Distortion (THD+N)
Gain range
XLR balanced
75 Hz
1/4’ TRS or TRS/RCA unbalanced
20 Hz to 22 kHz,+/‑1 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
‑15 dBu~ +35 dBu
<‑100 dBr A‑weighted
Mono channel Stereo channel
+/‑15 dB @12 kHz +/‑15 dB @12 kHz
+/‑15 dB @2.5 kHz
+/‑15 dB @80 Hz +/‑15 dB @80 Hz
RCA jack
20 Hz to 22 kHz,+/‑1 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
OFF to 15 dB
STEREO RETURNS
Input
Frequency response
Distortion (THD+N)
GAIN range
SNR
Impedances
Microphone input
All other inputs
Tape out
All other outputs
DSP section
A/D and D/A converters
Type of effects
Controls
FOOT‑SW
Main mix section
Max. MAIN MIX output
AUX range
Fader range
PHONES/CONTROL ROOM range
Hum & noise
Crosstalk
Power supply
Main voltage
Fuse
Power consumption
1/4’ TRS unbalanced
20 Hz to 22 kHz,+/‑1 dB
<0.03% @ +0 dB, 22 Hz~22 kHz A‑weighted
OFF TO +15 dB
<‑100 dBr A‑weighted
1.8 kΩ
10 kΩ or higher
1 kΩ
120 Ω
24 bit
Echo, Echo+Verb, Tremolo, Plate, Chorus, Vocal Rotary, Small Room, Flange + Verb, Large Hall
100 position presetting selector (10 preset effects * 10 variations) Mute switch & footswitch with LED indicator
TIP: FX SLEEVE: EARTH
+22 dBu XLR balanced (+16 dBu unbalanced)
OFF to +15 dB
OFF to +10 dB
OFF to +15 dB
<‑80 dB @ 20 Hz~22 kHz A‑weighted 1 channel & MAIN level:0 dB, other channels: minimum
<‑80 dB @0 dB 20 Hz~22 kHz A‑weighted MAIN level:0 dB, other channels: minimum
100‑240 V AC ~ 50/60 Hz
T1.6AL AC250 V
40 W max.
SPECIFICATIONS / SPECIFICHE / SPÉCIFICATIONS / ESPECIFICACIONES / TECHNISCHE DATEN
ENGLISHITALIANOFRANÇAISESPAÑOLDEUTSCH