What to do if the output voltage is not correct for the connected equipment in RCI 10-175UL?
If the output voltage from your RCI Power Supply is incorrect, immediately disconnect the AC power, battery, and all connected equipment. Then, adjust the voltage selection switch to the correct voltage. Finally, reconnect the equipment and reapply AC power.
How to troubleshoot no DC output from RCI 10-175UL Power Supply terminals?
If there's no DC output from the terminals of your RCI Power Supply, check the AC and DC LEDs on the power supply board. For normal operation, both LEDs should be on: AC ON (GREEN), Trouble (AMBER), and DC ON (RED). If the LEDs are not lit, verify the AC power supply.
General| Brand | RCI |
|---|---|
| Model | 10-175UL |
| Category | Power Supply |
| Language | English |
Details the output voltage, switch position, max stand-by load, max alarm load, and optional battery.
Outlines stand-by performance for 12VDC and 24VDC batteries, including duration and alarm current.
Instructions for mounting the unit, connecting AC power, and grounding.
Guidance on setting output voltage and connecting batteries for operation.
Instructions for connecting signaling devices to AC Fail and other supervisory relays.
Procedure for checking the DC output voltage under normal load conditions.
Procedure for checking battery charge and connection integrity.
Description of terminal functions for connecting devices and batteries.
Explanation of LED indicators for power supply status (Normal, Battery Backup, No DC Output).
Detailed diagrams showing the enclosure's physical dimensions and mounting hole locations.
Troubleshooting steps for when the unit provides no DC output.
Steps to resolve issues with incorrect output voltage for connected equipment.
Guidance on checking the status of trouble output relays and battery voltage.
To Next Page