RCI 9212ilw - User Manual

IS9212iLW
Features:
• FlushMount,SingleGang
•IlluminatedBacklitKeys
•KeypadProgrammable
• KeypressFeedbackviaBuilt-InSounder
•Bi-ColorRed/GreenLEDIndicatesRelayStatus
•YellowLEDIndicatesProgramMode
•120Users
•SingleUseCodes
•LockoutUsers
•Passage/ToggleCodes
•10to30VoltDCOperation
•12to24VoltACOperation
•2AmpMainRelay
•RemoteTriggerInput(REX)
• 2YearWarranty
Product Description:
The212iLWkeypadfeaturesasingle-relayoutputtocontrolany
devicerequiringanon/offswitch.Theoutputistimedorlatchedand
operatedbyauser’sPINcode.Additionally,the212iLWkeypad
providesbasickeylessentrybycontrollingadoorlockingdevice
wheresecurityisnotanissue.
The212iLWstylekeypadsaredesignedforbothindoorandoutdoorush
mountapplications.Theelectronicsareconformalcoatedinthe
manufacturingprocessinordertoprovidethislevelofapplication
exibility.Inaddition,eachkeypaduseshardenedkeystoassurelong-term,
high-qualityperformance.
Eachkeypadcontainsilluminatedclearkeysthatmakeoperationinlow
lightsituationseasyandaccurate.iLWstylekeypadsmounttoanystandard
single-gangelectricalboxordirectlytoanywall.
Specifications:
Parameter Range/Description
Voltage 10–30VDC,12-24VAC(Auto-Adjusting)
Current 93mA@10VDC;158mA@30VDC,148mA@12VAC;198mA@24VAC
Environment ForIndoorandOutdoorUse
TemperatureTolerance -20°Fto130°F(-28°Cto54°C)
Dimensions 51/8”Hx33/8”Wx5/8”D
MainRelay(FormC) ContactRating:2A@30VAC/DC
REXInput NormallyOpenDryContact
DoorPositionInput NormallyClosedDryContact
LEDs Bi-ColorRed/Green;Yellow
Default Keypad Settings
Parameter Default Setting
MasterCode 1234
LockOutput Relay1(Mainrelay)
AudioAlerts Notassigned
REX TriggersLockOutput
REXOperation AlwaysTriggers(regardlessofDoorLoop)
ErrorLockout/Threshold Enabled/3Attempts
ErrorLockoutDuration 10seconds
LockOutputTime 5seconds
Visual/AudioKeypressFeedback Enabled
Auto-Entry Disabled
UserLockout
Enabled
PCN13023
R11/13CA
INSTALLATION
9212iLW
Interior/Exterior Use Stand-Alone Keypad
©2013 RutheRfoRd contRols • www.RutheRfoRdcontRols.com
usA: 2517 sQuAdRon couRt, suIte 104, VIRGInIA BeAch, VA 23453 • cAnAdA: 210 sheARson cRescent, cAmBRIdGe, on n1t 1j6
Phone • 1.800.265.6630 • 519.621.7651 • fAX: 1.800.482.9795 • 519.621.7939 • e-mAIl: sAles@RutheRfoRdcontRols.com

Summary

Product Overview

Features

Lists key attributes like flush mount, backlit keys, user capacity, and warranty.

Specifications

Details technical parameters like voltage, current, temperature, and dimensions.

Product Description

Explains the keypad's function as a single-relay output device for door control.

Installation Guide

Mounting

Instructions for flush mounting the keypad to a single gang box or wall surface.

Wiring Configuration

Details the wire harness pinout and signal names for keypad connections.

Wiring to Maglock (Fail-Safe)

Step-by-step guide to connect the keypad to a fail-safe maglock.

Wiring to Electric Strike (Fail-Secure)

Step-by-step guide to connect the keypad to a fail-secure electric strike.

Advanced Configuration

Shunting Normally Closed Zone

Instructions for connecting the keypad to shunt a normally closed zone.

REX and Door Contacts Wiring

How to wire Request to Exit (REX) devices and door contacts.

Keypad Testing

Procedure for performing a self-test to verify keypad functionality.

Programming and Operation

Entering Program Mode

Method to access programming using master code and sequence.

Programming Users

Details for adding, modifying, and managing user codes and types.

Programming Keypad Options

Configuration of keypad features like feedback, auto-entry, and illumination.

Programming Options Chart

Quick reference for programming commands and options.

Troubleshooting and Support

Troubleshooting Common Issues

Solutions for problems like LED cycling, non-working master code, and no LEDs.

Wire Harness Loopback

Procedure to enter program mode if the master code is lost or not working.

RCI 9212ilw Specifications