RDT FloodMaster RS-094

To Next Page

Water Heater / Tank Leak Detection &

Automatic Shut-Off System

Congratulations on your purchase of a FloodMaster RS-094 water heater leak detection system

from Reliance Detection Technologies. This product is designed to automatically shut off the

water supply to a water heater or tank if a leak is detected.

To ensure proper installation and to maximize the performance of your RS-094 water leak

detection system, please read this manual thoroughly before installing or operating the system.

PLEASE READ CAREFULLY BEFORE PROCEEDING:

If a leak is detected, the RS-094 will shut off the water going to the water heater. This will stop

the continuous ow of water from the water supply to the tank. However, all or some of the

water that is already in the tank may still leak out onto the oor.

NOTE: This installation and operating manual contains important information about the operation of the

RS-094 system. If this system is being installed for use by a different user, please be sure a copy of this

manual is left with the system for future reference.

www.RelianceDetection.com Toll-Free: 888-771-4929

RS-094 System Components (included in kit):

1 – Receiver box / actuator

1 – Full port lead-free shut-off valve

(NSF/ANSI 61 and 372)

1 – Power supply with 12’ lead wire

1 – Water sensor with 8’ lead wire

1 – Metal plate for sensor placement

RS-094

Need help?

Do you have a question about the RDT FloodMaster RS-094 and is the answer not in the manual?

Summary

Water Heater; Tank Leak Detection & Automatic Shut-Off System

Installation and Operation

Installation Instructions

Step-by-step guide for installing the FloodMaster RS-094 system on water heaters.

Function Test

Procedures for testing the system's leak detection and automatic shut-off functionality.

Output Signal Connections

Information on utilizing the system's relay output for integration with other devices.

Operation and System Reset

Guidance on system operation, responding to leaks, and resetting the valve after an event.

Maintenance and Emergency Procedures

Maintenance

Guidelines for annual system testing and basic maintenance to ensure proper operation and warranty.

Emergency Manual Valve Operation

Procedures for manually operating the shut-off valve in emergency situations by disengaging the actuator.