OPERATING INSTRUCTIONS
En
3. Waste Disposal
4. Install the Outer Filter
Dust Container
Please restore the handle of the filter to its original position and attach the Dust
Container to the main body.
5. Reattaching the Dust Container
• To reattach the Dust Container to the main body.
Ensure the protrusion (bump) on the main body
aligns with the position of the hole in the Dust
Container as shown in the figure.
• Once the protrusion is aligned with the Dust
Container hole, push the Dust Container toward
the vacuum. Make sure there is a “click” sound,
which indicates it is securely attached.
Blue Release Button
Please ensure that the Dust Container is securely installed with a “click”
sound, otherwise, it could drop off.
To Next Page
Loading...