EasyManua.ls Logo

ReadiVac EAZE - Recharging; Initial Charging; Charging Time and Indicators; Charging Environment

ReadiVac EAZE
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P9
En
RECHARGING
The vacuum cleaner should be fully charged before initial use.
If the main unit is warm to the touch because of it being used for an
extended period of time, please let the product cool down for a few
minutes prior to being recharged.
Average charging time for a full charge is 4 - 6 hours assuming batteries have
been completely discharged. Switch LED will turn Blue when battery is fully
changed. LED will light Red when battery is charging.
If the suction power is weaker than normal, please make sure the vacuum
cleaner is fully charged.
The vacuum cleaner should be charged in an environment that ranges from
50°F to 104°F (10°C to 40°C).
If the vacuum cleaner is not to be used for a long period of time (over 1
month), it should be fully charged before storage.
The Li-ion battery cells are “Hard Wired” internally into the unit and only a
qualified service technician should perform any type of service on them.
Failure to follow this safety requirement can lead to serious injury, death,
fire and/or explosion!
Any signs of adjustment and/or tampering with internal electrical
components, including but not limited to the Li-ion battery cells will void any
active or remaining warranty on the unit.
1. Use the AC/DC Charging Adapter as provided.
2. Do not use the machine to vacuum during recharging.
NOTE:

Related product manuals