What to do if there is no sound from Real-El Speakers?
If there is no sound or the sound is too quiet from your Real-El Speakers, it might be due to the volume level being set at the minimum. Try adjusting the volume control knob. Another possible reason is an improperly connected audio source. Ensure that you connect the audio sources correctly.
Why is the remote control not working for my Real-El Speakers?
If the remote control for your Real-El Speakers is not working, the batteries may be discharged. Replace the batteries with new ones to resolve this issue.
What to do if the sound is distorted on Real-El Speakers?
If you are experiencing sound distortion with your Real-El Speakers, it might be due to a large amplitude of the input signal. Try turning down the source volume and the speaker volume to reduce the distortion.
General| Type | 2.1 |
|---|---|
| Frequency response | 40Hz - 20kHz |
| Signal/Noise ratio | ≥ 75 dB |
| Separation | ≥ 45 dB |
| Satellite output power | 10W x 2 |
| Power supply | 220V, 50Hz |
Lists key features of the speaker system, including Bluetooth and USB playback.
Detailed description of the remote control and its various buttons and functions.
Explains how to use the player mode with USB/SD cards for audio playback.
Details the process of connecting and using the speaker system via Bluetooth.
Covers tuning, scanning, and managing FM radio stations.
Describes how to connect the system to other devices via AUX.
Explains how to activate and deactivate the sound mute function.
To Next Page