Need help?Do you have a question about the real living BL-EC2 and is the answer not in the manual?
Attach KD Metal Legs (B) to the Star Base (C) using 5 Bolts (G3) and the Allen Wrench (L).
Insert Casters (A) into the holes at the end of each leg of the Star Base (C).
Turn the Star Base (C) upright and insert the Gas Lift (H) into the center hole.
Attach the J-Bar (I) to the Back Cushion (F) using 4 Bolts (G) and the Allen Wrench (L).
Align and attach the Seat Plate (D) to the Seat Cushion (E) using 4 Bolts (G1) and the Allen Wrench (L).
Attach the assembled Back Cushion (F) to the Seat Cushion (E) using 4 Bolts (G2) and the Allen Wrench (L).
Align the Seat Plate (D) with the top of the Gas Lift (H) and press firmly into place.
The chair is fully assembled; adjust height using the handle.
General| Brand | real living |
|---|---|
| Model | BL-EC2 |
| Category | Indoor Furnishing |
| Language | English |
To Next Page
