▪ Press the Power button to change the instrument display interface:
- 00:00 indicates time
- TRIP indicates single trip mileage
- ODO indicates accumulated mileage
- VOL indicates battery voltage
▪ Under the selected interface, press and hold the Function button to modify. (For
example, holding the Function button when under the TRIP interface will return
single trip mileage will return to zero.)
Press the Power button to change speed settings:
▪ 1 = slow speed
▪ 2 = medium speed
▪ 3 = fast speed
Note: If no input is made within three minutes of the speedometer being powered ON, the
meter will automatically turn OFF.
To Next Page
Loading...