SECTION 2. ASSEMBLY INSTRUCTIONS
Assembling your scooter takes just two steps:
1. Place the handlebar on the steering rod and tighten the screw.
2. Using the arrows and color coding as guides, join the waterproof connectors.
SECTION 3. SPEEDOMETER OPERATION INSTRUCTIONS
The speedometer has two buttons, Power and Function.
Press and hold the Power button to turn the speedometer ON/OFF.
When the speedometer is ON, battery level and speed are instantaneously displayed. Follow
these steps to display time, single trip mileage, accumulated trip mileage or battery voltage:
To Next Page
Loading...