Realalt 3D TriFit User Manual

USER’S MANUAL
3DTriFit
3D Pedometer
By
Realalt
PLEASE NOTE
This pedometer has a
PAUSE FEATURE.
If your pedometer is
not recording steps,
then your Pause
feature may be
activated. See Page 6
to learn how to simply
control the Pause
Feature.
Flashing ‘ ’ icon
= Active Pedometer.
BEFORE YOU
START
Press the RESET button
on the back of the
pedometer using the
included pin to
prepare your
pedometer for setup.

Realalt 3D TriFit Specifications

General

Type	Pedometer
3D Sensor	Yes
Display	LCD
Step Counter	Yes
Calorie Counter	Yes
Distance Tracking	Yes
Activity Time Tracking	Yes
Memory	30 days
Battery Type	CR2032
Clip Type	Belt clip
Weight	0.8 oz (22.7 g)

Summary

BEFORE YOU START

Initial Setup Preparation

Press the RESET button on the back of the pedometer using the included pin to prepare for setup.

FEATURES

Key Pedometer Features

Lists the main functionalities of the 3D TriFit pedometer, including modes and sensors.

LAYOUT

Device Component Identification

Identifies the main physical components of the pedometer and their labels.

BEFORE YOU START SETUP

Information Required for Setup

Details necessary personal information and preferences for configuring the pedometer.

SETUP PROCESS OVERVIEW

Setup Mode Entry and Button Functions

Explains how to enter setup mode and the function of each button during the process.

SETUP STEPS

Setting Time and Time Format

Guides through setting the hour, minutes, seconds, and 12/24 hour format.

Configuring Units and Personal Data

Covers setting measurement units, weight, and stride length for accurate tracking.

OPERATING MODES AND ICONS

Understanding Operating Modes

Explains the different modes of the pedometer and their corresponding icons.

PAUSE FEATURE

Using the Pause Feature

Details how to activate and deactivate the pause function while in Step Mode.

15 STEP ERROR PREVENTION FEATURE

Error Prevention Feature

Describes the 15-step error prevention mechanism for accurate step counting.

CHANGING UNITS OF MEASUREMENT

Changing Units of Measurement

Explains how to switch between metric (km) and imperial (mile) units.

AUTOMATIC MIDNIGHT RESET

Automatic Midnight Reset Function

Details the daily reset function for tracking modes and data saving.

RESETTING YOUR 3D PEDOMETER

Resetting Daily Records

How to erase current day's step, distance, calorie, speed, and timer records.

Erasing 7 Day Memory Records

Procedure to erase all accumulated records saved in the 7 Day Memory Mode.

Factory Reset Procedure

Instructions to reset the pedometer to its original factory settings.

STANDBY MODE

Understanding Standby Mode

Explains how the pedometer enters and operates in standby mode.

LOW BATTERY INDICATOR

Low Battery Indicator

Describes the icon indicating a low battery level and the need for replacement.

BATTERY REPLACEMENT

Battery Replacement Procedure

Step-by-step guide for replacing the CR-2032 button cell battery.

FAQ

Troubleshooting: Pedometer Not Recording Steps

Addresses issues with the pedometer not recording steps, often due to the pause feature.

Troubleshooting: Unexpected Daily Reset

Explains why daily records might reset and how to ensure correct time settings.

Troubleshooting: Inaccurate Distance Records

Discusses how stride length affects distance calculation and how to set it correctly.

NEED HELP

Contacting Support and Resources

Provides contact information and links for support, setup videos, and more.