RealFlame 4099 User Manual

Installing the 4099 Electric Firebox
Figure 1
Figure 2
Step One
Figure 1
From the rear of the mantel insert the
firebox into the opening.
Note: Your mantel may vary slightly from
the one depicted in this illustration.
Step Two
Figure 2
Attach the firebox to the back of the mantel
with the 4 supplied wood screws.
Wood Screws
Read and understand all instruction manuals included with your firebox
and mantel before installing this unit.
Follow the below steps to install the electric
firebox into your Real Flame® fireplace mantel.
!
WARNING

RealFlame 4099 Specifications

General

Model	4099
Type	Electric Fireplace
Fuel Type	Electric
Voltage	120V
Wattage	1500W
Adjustable Flame	Yes
Adjustable Thermostat	Yes
Remote Control	Yes
Timer	Yes
Heating Area	Up to 400 sq ft
Flame Effect	Realistic Flame Effect
Safety Features	Overheat Protection
Color Options	Black

Summary

Installing the 4099 Electric Firebox

Important Safety Warning

Read and understand all instruction manuals included with your firebox and mantel before installing.

Step One: Firebox Insertion

From the rear of the mantel, insert the firebox into the opening.

Step Two: Firebox Securing

Attach the firebox to the back of the mantel with the 4 supplied wood screws.